$sv=0
M114   ; report position
G1 X0 F10000 ; go to the start, set feed-rate
M115 ; show the firmware
G4 P0 ; test dwell 0 (hanged before)
G4 P1 ; dwell a second
G1 X10 ; move in pieces, the planner should do them as one.
G1 X20 
G1 X30 
G1 X40 
G1 X50 
M400   ; wait for completion
M114   ; report position
G1 X75  
M114   ; report position
G92 X-25 ; set position
M114   ; report position
G1 X0
M400
M114

